CURING STATION

Curing Station is a professional post-processing device which provides UV light exposure required to achieve desired mechanical properties of models 3D printed with photopolymer resins. It has been designed to provide necessary UV curing for models 3D printed on a resin 3D printer. UV exposure time is set individually for each supported resin but usually does not exceed a few minutes. It’s dedicated to post-process even the most professional and demanding resins (quality approved by BASF Forward AM and Henkel/Loctite).

• Supports most popular resin 3D printing technologies: UV LCD, DLP, and SLA
• Curing process is fully automated, soft close door with glass and a layer of UV filter
• 300 x 200 x 300mm workspace volume, UV light - 405nm wavelength
• Metal chamber with a mirrored surface supporting even light distribution around 3D prints
• Touch control panel; single colour display; on/off button, door opening sensor
• UV filter embedded into the front door
• Device dimension (W x D x H) is 464 x 470 x 501mm
• 100 - 240VAC max 2A - 120V AC input, 240W maximum power consumption
• Metal with a mirrored surface supporting even light distribution around 3D prints chamber

Contents

Zortrax curing station, Starter kit.