MKE06Z128VLH4

The MKE06Z128VLH4 is a 32-bit Kinetis KE02 Robust Microcontroller based on ARM Cortex-M0+ RISC architecture core operates at a maximum frequency of 48MHz. The device incorporates 128kB internal flash, 16kB internal RAM, one 12-bit SAR A/D converter, two 6-bit D/A converter and 58 general-purpose I/O pins. This device also features communication interfaces like three UART modules, two SPI modules and two I2C module.

• Single cycle 32 x 32-bit Multiplier
• Single cycle I/O access port
• Oscillator (OSC) - Supports 32.768kHz crystal or 4MHz to 24MHz crystal or ceramic resonator
• Internal clock source (ICS)
• Internal 1kHz Low-power oscillator (LPO)
• Power management module (PMC) with three power modes - run, wait, stop
• Low-voltage detection (LVD) with reset or interrupt, selectable trip points
• Watchdog with independent clock source (WDOG)
• Programmable cyclic redundancy check module (CRC)
• Serial wire debug interface (SWD)
• Aliased SRAM bit band region (BIT-BAND)
• Bit manipulation engine (BME)
• 80-bit Unique identification (ID) number per chip
• Two 32-bit Keyboard interrupt modules (KBI)
• External interrupt (IRQ)
• Two analog comparators containing a 6-bit DAC and programmable reference input (ACMP)
• One 6-channel Flex timer/PWM (FTM)
• Two 2-channel Flex timer/PWM (FTM)
• 2-channel Periodic interrupt timer (PIT)
• Pulse width timer (PWT)
• One real-time clock (RTC)
• One MSCAN module (MSCAN)

Applications

Industrial