MK66FN2M0VLQ18

The MK66FN2M0VLQ18 is a 32-bit Kinetis K6x Microcontroller with Ethernet crypto, based on ARM Cortex-M4 RISC architecture core operates at a maximum frequency of 180MHz. The device incorporates 2048kB internal flash, 256kB internal RAM, two 16-bit SAR A/D converter, two 12-bit D/A converter and 100 general-purpose I/O pins. This device also features communication interfaces like six UART modules, three SPI modules, four I2C modules and one I2S module.

• ARM Cortex-M4 core with DSP instructions and single precision floating point unit
• Multiple low-power modes to provide power optimization based on application requirements
• Memory protection unit with multi-master protection
• 3 to 32MHz Main crystal oscillator
• 32kHz Low power crystal oscillator
• 48MHz Internal reference
• Hardware random-number generator
• Supports DES, AES, SHA accelerator (CAU)
• Multiple levels of embedded flash security
• 4 Periodic interrupt timers
• 16-bit Low-power timer
• Two 16-bit Low-power timer PWM modules
• Two 8-channel Motor control/general purpose/PWM timers
• Two 2-channel Quad decoder/general purpose timers
• Real-time clock
• Low-power hardware touch sensor interface (TSI)
• General-purpose input/output
• FlexBus external bus interface and SDRAM controller
• 4 Analog comparators (CMP) containing a 6-bit DAC and programmable reference input
• 1.2V Voltage reference
• Ethernet controller with MII and RMII interface to external PHY and hardware IEEE 1588 capability
• USB High-/full-/low-speed On-the-Go with on-chip high speed transceiver
• USB Full-/low-speed OTG with on-chip transceiver
• Two controller area network (CAN) modules
• Secure digital host controller (SDHC)

Applications

Industrial, Communications & Networking