LPC2388FBD144K

LPC2388FBD144K is a single-chip 16-bit/32-bit microcontroller. It is based on a 16-bit/32-bit ARM7TDMI-S CPU with real-time emulation that combines the microcontroller with 512Kb of embedded high-speed flash memory. A 128-bit wide memory interface and a unique accelerator architecture enable 32bit code execution at the maximum clock rate. For critical performance in interrupt service routines and DSP algorithms, this increases performance upto 30 % over thumb mode. For critical code size applications, the alternative 16bit thumb mode reduces code by more than 30% with minimal performance penalty. It is ideal for multi-purpose serial communication applications. EMC provides support for static devices such as flash and SRAM as well as off-chip memory mapped peripherals. It is used in applications such as industrial control, medical systems, protocol converter, communications.

• ARM7TDMI-S processor, running at upto 72MHz
• 64Kb of SRAM on the ARM local bus for high performance CPU access
• 16Kb SRAM for ethernet interface can also be used as general purpose SRAM
• 16Kb SRAM for general purpose DMA use also accessible by the USB
• Advanced vectored interrupt controller (VIC), supporting upto 32 vectored interrupts
• 104 general purpose I/O pins with configurable pull-up/down resistors
• 10bit ADC with input multiplexing among 8 pins, 10bit DAC
• Standard ARM test/debug interface for compatibility with existing tools
• Operating voltage range from 3V to 3.6V, emulation trace module supports real-time trace
• Operating temperature range from -40°C to +85°C, LQFP144 package