LPC2368FBD100K

LPC2368FBD100K is a single-chip microcontroller. A 128bit wide memory interface and a unique accelerator architecture enable 32bit code execution at the maximum clock rate. For critical performance in interrupt service routines and DSP algorithms, this increases performance up to 30% over Thumb mode. For critical code size applications, the alternative 16bit thumb mode reduces code by more than 30% with minimal performance penalty. It is ideal for multi-purpose serial communication applications. General Purpose DMA controller (GPDMA) on AHB that can be used with the SSP serial interfaces, the I2S port, and the Secure Digital/MultiMediaCard (SD/MMC) card port, as well as for memory-to-memory transfers. Applications include industrial control, medical systems, protocol converter, communications.

• 16KB SRAM for Ethernet interface, can also be used as general purpose SRAM
• Advanced vectored interrupt controller (VIC), supporting up to 32 vectored interrupts
• Standard ARM test/debug interface for compatibility with existing tools
• Emulation trace module supports real-time trace
• Single 3.3V power supply (3.0V to 3.6V)
• Four reduced power modes: idle, sleep, power-down, and deep power-down
• Two independent power domains allow fine tuning of power consumption based on needed features
• Brownout detect with separate thresholds for interrupt and forced reset
• 512KB flash, 58KB total SRAM, LQFP100 package
• Temperature range from -40°C to +85°C