ATTINY85-20PU

ATTINY85-20PU is an Atmel 8-bit AVR microcontroller. It is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, this achieves throughputs approaching 1MIPS per MHz, allowing the system designer to optimize power consumption versus processing speed. The device is manufactured using Atmel’s high-density non-volatile memory technology. The On-chip ISP Flash allows the Program memory to be re-programmed In-System through an SPI serial interface, by a conventional non-volatile memory programmer or by on-chip boot code running on the AVR core. It is supported with a full suite of program and system development tools, including C compilers, macro assemblers, program debugger/simulators, and evaluation kits.

• 120 powerful instructions – most single clock cycle execution
• 32 x 8 general-purpose working registers, fully static operation
• debugWIRE on-chip debug system, in-system programmable via SPI port
• External and internal interrupt sources
• Low power idle, ADC noise reduction, and power-down modes
• Enhanced power-on reset circuit
• Programmable brown-out detection circuit, internal calibrated oscillator
• 20MHz speed, 2.7 – 5.5V supply voltage
• Industrial temperatures range from -40°C to +85°C
• 8-lead, 0.300" wide, plastic dual inline package (PDIP)

Warnings

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.