Customer Reviews
Community
Like to see information about this product from other customers?
Read discussions, blogs, documents from our community members.
You have entered a value in the highlighted fields below that contain invalid characters. Please revise your selection using valid characters only.
Low
AT91SAM9X35-EK -
Evaluation Kit, AT91SAM9X35 MCU, LCD Controller, Rich Set of Peripherals
- Manufacturer:
- MICROCHIP MICROCHIP
- Manufacturer Part No:
- AT91SAM9X35-EK
- Order Code:
- 2097741
- Technical Datasheet:
- AT91SAM9X35-EK Datasheet
Product Information
- :
- Atmel
- :
- 32bit
- :
- AT91SAM9xxx
- :
- ARM
- :
- ARM926
- :
- SAM9X
- :
- CPU Module Board with SAM9 Processor, LCD Controller Board
- :
- -
Product Overview
The AT91SAM9X35-EK is an evaluation kit that enables the evaluation and code development of applications running on a SAM9X35 device. The SAM9X35 is a highly integrated 400MHz ARM926 embedded MPU, featuring an extensive peripheral set and high bandwidth architecture for industrial applications that require refined user interfaces and high speed communication. The SAM9X35 features a graphics LCD controller with 4 layer overlay and 2D acceleration (picture-in-picture, alpha-blending, scaling, rotation, colour conversion), and a 10bit ADC that supports 4 or 5 wire resistive touch screen panels. Networking/connectivity peripherals include two 2.0A/B compatible controller area network (CAN) interfaces and an IEEE Std 802.3-compatible 10/100Mbps Ethernet MAC. Multiple communication interfaces include a soft modem supporting exclusively the conexant SmartDAA line driver, HS USB device and host, FS USB host, two HS SDCard/SDIO/MMC interfaces, USARTs, SPIs, I2S, TWIs and 10bit ADC.
- Consists of SAM9X35 400MHz CPU external memory DDR2-SDRAM (1Gb) NAND flash (2 or 4Gb)
- Three USB ports and two high speed SD/MMC interfaces
- HS (EHCI) and FS (OHCI) host, multiplexed with HS USB device via micro AB connector
- HS (EHCI) and FS (OHCI) host, via standard type A connector
- FS only (OHCI) host, via standard type A connector
- One Ethernet 10/100 interface with On board MAC controllers and RJ45 sockets
- One stereo CODEC interface with line-in and headphone jacks
- Two CAN interfaces and three serial interfaces (2x USART, 1x UART)
- One telephone/modem interface with RJ11 connector and one TFT-LCD module interface
- One Two Wire Interface (TWI) and one ZigBee extension port
Applications
Industrial, Automation & Process Control, Consumer Electronics, Sensing & Instrumentation, Communications & Networking
Contents
One EK board with SAM9X35-CM CPU module, universal power supply with US, Europe and UKplug adapters, one 3V Lithium battery CR1225, one serial RS232 cable, one micro A/Btype USB cable, one RJ45 crossed cable.
Footnotes
One optional display module.
Warnings
The board must not be subjected to high electrostatic potentials. In risky ESD environments a grounding strap or similar protective device should be worn when handling the board.
Associated Products
Awaiting Delivery
Available for backorder to lead times shown
More stock available week commencing 11/4/19
Php42,105.40
Pricing is unavailable. Please contact customer services.
- Price for:
- Each
Multiple: 1 Minimum: 1
Total Price:
Total Price: ( )
Total Price: --
Filter Tool