AT91SAM9260-EK

AT91SAM9260-EK evaluation kit enables the evaluation of and code development for applications running on an AT91SAM9260 device. The board supports the AT91SAM9260 in an LFBGA217 package as well as in a PQFP208 package. The SAM9260 is based on the integration of an ARM926EJ-S processor with fast ROM and RAM memories and a wide range of peripherals. The SAM9260 embeds an Ethernet MAC, one USB Device Port, and a USB Host controller. It also integrates several standard peripherals, such as the USART, SPI, TWI, Timer Counters, Synchronous Serial Controller, ADC and Multimedia Card Interface. The SAM9260 is architectured on a 6 layer matrix, allowing a maximum internal bandwidth of six 32bit buses. It also features an external bus interface capable of interfacing with a wide range of memory devices.

• 64Mbytes of SDRAM memory
• 256Mbytes of NANDFlash memory
• Serial dataFlash, TWI serial EEPROM
• DBGU serial communication port
• MODEM serial communication port
• JTAG/ICE debug interface
• PHY Ethernet 100 base TX with three status LEDs
• AT73C213 audio DAC
• DataFlash, SD/MMC card slot
• Four expansion connectors (PIOA, PIOB, PIOC, IMAGE SENSOR)

Applications

Communications & Networking, Audio, Embedded Design & Development, Building Automation, Security, Metering

Contents

Board, Universal input AC/DC power supply with US and Europe plug adapter, USB cable, RS232 cable, Ethernet cable, CD.

Warnings

The board must not be subjected to high electrostatic potentials. A grounding strap or similar protective device should be worn when handling the board.

Notes

90 Day Warranty only. After Expiration of Warranty returns must be processed via Microchip.