PP0001A

PP0001A is a Keysight’s first passive probe with up to 1GHz of analogue bandwidth with less than 4pF of capacitive loading. It provides all the ease-of-use benefits of a passive probe, with the performance generally seen from an active probe. The AutoProbe I interface provides offset and auto-configuration of probe type and attenuation setting. The PP0001A is designed for use on InfiniiVision and Infiniium oscilloscopes with the AutoProbe I interface, with the use of the PP0004A adapter.

• 300Vrms CAT II input voltage, and up to 1.5KV peak transient overvoltage
• 10Mohm input impedance at low frequencies
• AutoProbe I compatibility
• 1.3meter cable length for ease-of-use
• Small 5mm tip and compact probe design for easy probing on smaller targets
• Variable attenuation, automatically configured by the oscilloscope
• Rigid tip for secure device-under-test connectivity
• Replaceable probe tip cartridges
• Large accessory set for versatile connectivity

Contents

Probe, Channel identification rings (4 each, in 4 colours), Grabber hook tip, Ground clip, Ground spring (x2), BNC to probe tip adapter, Probe tip cartridge 300V rating, Protective tip covers (x2), Adapter for PP0001A, PP0002A, PP0003A.