You have entered a value in the highlighted fields below that contain invalid characters. Please revise your selection using valid characters only.
Product may not be an exact match for your search
You previously purchased this product.
View in Order History
FTDI UMFT221XA-01
Evaluation Module, USB To SPI, Designed to Plug into Standard 0.3" 24pin DIP Socket
- Manufacturer:
- FTDI FTDI
- Manufacturer Part No:
- UMFT221XA-01
- Order Code:
- 2081344
- Technical Datasheet:
- UMFT221XA-01 Datasheet
- ECAD / MCAD
-
Product Overview
The UMFT221XA-01 is an USB to 8bit SPI/FT1248 DIP development module with a 0.3inch row pitch. It incorporates a FT221XQ USB to SPI/FT1248 interface with a battery charger detection feature, which can allow batteries to be charged with a higher current from a dedicated charger port (without the FT221X being enumerated). In addition, asynchronous and synchronous bit bang interface modes are available. The internally generated clock (6MHz, 12MHz and 24MHz) can be brought out on the CBUS pin to be used to drive a microprocessor or external logic. The UMFT221XA-01 is a module which is designed to plug into a standard 0.3inch wide 20 pin DIP socket. This development module has two solder links fixed to the top side of the PCB. These solder link can be adjusted by removing the solder linking the two PADs to produce an open or by placing a solder bridge to produce a short.
- Small PCB assembly module designed to fit a standard 7.62mm (0.3inch) wide 20 pin DIP socket
- On board USB mini B socket allows module to be connected to PC via a standard A to mini B USB cable
- Functionally configurable using solder links
- Default solder links setup enables module to function without peripheral wires or application board
- Entire USB protocol handled on the chip, no USB specific firmware programming required
- UHCI/OHCI/EHCI host controller compatible
- USB 2.0 full speed compatible
- Low USB bandwidth consumption
- Device supplied preprogrammed with unique USB serial number
- Integrated power on reset circuit
Applications
Communications & Networking, Power Management
Footnotes
Use of this device in life support and/or safety applications is entirely at the user's risk.
Warnings
Failure to properly remove solder from JP1 and JP2 can cause a direct short between two different power supplies resulting in damage to the UMFT221XA-01 module and the target circuit.
Product Information
Want to see similar products? Simply select your required attributes below and hit the button ×
- :
- Interface
- :
- USB to SPI
- :
- FTDI
- :
- FT221XQ
- :
- -
- :
- Eval Board FT221XQ
Technical Documents (1)
10 In stock Need more?
×
You can reserve stock now just order your desired quantity and checkout as normal. The quantity that cant be dispatched now will be placed on back order and sent as soon as we get a delivery from our supplier. You only get charged when the products are dispatched to you.
Extra stock is available upon order to the Supplier Lead Time which is approximately 7/15/24
10 UK stock available for 3-4 business days delivery
Due to market conditions delivery times are for general guidance only and may be subject to change at short notice
Php1,278.80
Pricing is unavailable. Please contact customer services.
- Price for:
- Each
Multiple: 1 Minimum: 1
- 1+
| Quantity | Price | Your Price |
|---|---|---|
| 1+ | Php1,278.80 | |
| Quantity | Price | Your Price |
|---|
Pricing is unavailable. Please contact customer services.
Total Price:
Total Price: ( )
Total Price: --
Filter Tool