MAX11212AEUB+

The MAX11212AEUB+ is an 18bit, 120sps, single channel, ultra low power, delta-sigma analogue to digital converter (ADC) in 10 pin µMAX package. This high resolution, serial output ADC operates from 2.7V to 3.6V analogue and 1.7V to 3.6V digital supply range. It provides highest resolution per unit power in industry and it is optimized for applications that require very high dynamic range with low power such as sensors on 4mA to 20mA industrial control loop. This MAX11212 provides high accuracy internal oscillator that requires no external components. When used with the specified data rates, the internal digital filter provides more than 80dB rejection of 50Hz or 60Hz line noise. The device is used in sensor measurement (temperature and pressure), portable instrumentation, weigh scales and battery applications.

• No missing codes, ±2KV ESD protection
• Operating temperature range from -40°C to 85°C
• Serial 2-wire interface (clock Input and data output)
• INL of ±10ppmFSR, zero error of ±20ppmFSR and full scale error of ±35ppmFSR
• Operating mode current drain of <lt/> 300μA and sleep mode current drain of <lt/> 0.1μA
• Fully differential signal inputs
• Fully differential reference inputs, 2.4576MHz internal system clock
• External clock, on-demand offset and gain self-calibration
• Total operating current of 230μA
• Power supply rejection of 80dB (AVDD DC rejection), 100dB (DVDD DC rejection)

Applications

Signal Processing, Consumer Electronics, Portable Devices

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party