LTC2633CTS8-LZ12#TRMPBF

LTC2633 is a dual 12bit voltage-output DAC with an integrated, high accuracy, low drift reference. It has rail-to-rail output buffers and is guaranteed monotonic. This device has a full-scale output of 2.5V, and operates from a single 2.7V to 5.5V supply. It can also operate with an external reference, which sets the full-scale output to the external reference voltage. This DAC communicate via a 2-wire I²C-compatible serial interface. It operates in both the standard mode (clock rate of 100KHz) and the fast mode (clock rate of 400KHz). It incorporates a power-on reset circuit. Options are available for reset to zero-scale, reset to mid-scale in internal reference mode, reset to mid-scale in external reference mode, or reset with all DAC outputs in a high impedance state after power-up. It is used in applications such as mobile communications, process control and industrial automation, power supply margining, portable equipment, automotive.

• Internal power on reference mode
• Double-buffered data latches
• 2.5V VFS with internal reference
• Power on reset to code is zero scale
• Operating VCC voltage range from 2.7V to 5V
• Differential nonlinearity is ±1LSB maximum at ( TA = 25°C)
• Integral nonlinearity is +2.5LSB maximum at (TA = 25°C)
• Supply current is 0.4mA typical at (VCC = 3V, internal reference)
• Output voltage noise density is 180nV/√Hz typical at (f = 1KHz, external reference)

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party