You have entered a value in the highlighted fields below that contain invalid characters. Please revise your selection using valid characters only.

Product may not be an exact match for your search

You previously purchased this product. View in Order History



Evaluation Board, MIC28514 Hyper Speed Control Synchronous DC/DC Buck Regulator, 4.5V & 75V Vin


Image is for illustrative purposes only. Please refer to product description.

Manufacturer Part No:
Order Code:

Product Overview

The ADM00804 from Microchip is an MIC28514 evaluation board. The MIC28514 is high performance 75V/5A Hyper Speed Control® synchronous DC/DC buck regulator with external soft start. This MIC28514 evaluation board is a constant-frequency synchronous buck switching regulator features unique adaptive ON-time control architecture. The is used to demonstrate high voltage input step-down design which can deliver up to 95% efficiency to a broad range of output voltages. The board accepts up to 75V input voltage, regulating down to 0.8V output voltage. The fitted pin header allows for output voltage selection between 0.8V, 1.2V, 2.5V, 3.3V, 5.0V and 12V. The MIC28514 and the board can be loaded up to 5A continuous output current. It also features an auxiliary bootstrap low dropout (LDO) which improves the system efficiency by supplying the internal bias power from the output of the converter.
  • Input voltage ranges from 4.5V and 75V, output voltage range from 0.8V and 12V
  • 5A continuous output current, 270KHz to 800KHz switching frequency
  • Logic level enable (EN) signal that can be used to enable or disable the controller
  • Can start-up monotonically into a pre-biased output
  • Adjustable soft-start time
  • Programmable current limit
  • Hicc-up mode short circuit protection, thermal shutdown
  • Open-drain power good signal (PG) which signals when the output is in regulation


Power Management


MIC28514 evaluation board (ADM00804), Important information sheet.


The maximum VIN of board is rated at 75V. Exceeding 75V on VIN could damage the device.


The MIC28514 does not have reverse polarity protection. Applying a negative voltage to VIN and GND terminals may damage the device. Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.

Product Information

Find similar products Choose and modify the attributes above to find similar products.

Technical Documents (1)

CAD Downloads


Terms and Conditions

CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.

Accept Cancel

2 In stock Need more?

2 UK stock available for 3-4 business days delivery

Due to market conditions delivery times are for general guidance only and may be subject to change at short notice


Pricing is unavailable. Please contact customer services.

Price for:
Multiple: 1 Minimum: 1
Quantity Price Your Price
1+ Php7,687.00
Promotional price
Contract Price
Web only price
Web only contract price

Pricing is unavailable. Please contact customer services.

No longer stocked:: No Longer Manufactured::
Add to Basket Add to Basket Pre-Order
Restricted Item
Enter Your Part No/Line Note
Total Price:
Total Price: ( )
Total Price: --