You have entered a value in the highlighted fields below that contain invalid characters. Please revise your selection using valid characters only.
Product may not be an exact match for your search
You previously purchased this product.
View in Order History
MC56F82748VLH
Digital Signal Controller, MC56F82xx, 100 MHz, 64 KB, 54 I/O's, CAN, I2C, SPI , SCI, 1 V
- Manufacturer:
- NXP NXP
- Manufacturer Part No:
- MC56F82748VLH
- Order Code:
- 2368239
- Product Range
- MC56F82xx
- Technical Datasheet:
- MC56F82748VLH Datasheet
Product Range Selector (MC56F82xx)
See all from this product rangeProduct Overview
The MC56F82748VLH is a Digital Signal Controller offers outstanding power consumption at runtime with exceptional performance, precision and control. The digital signal controller (DSC) is based on the 32-bit 56800EX core. Each device combines, on a single chip, the processing power of a DSP and the functionality of an MCU with a flexible set of peripherals to support many target application such as circuit breaker and home appliances. Increases system safety by restricting user code from accessing key memory locations and peripherals reserved for supervisor access. It enables compact PCB design for space-constrained applications while still providing the precision and control needed. 32-bit core provides math capabilities needed for advanced power efficiency and motor control applications. Single-cycle math computations, fractional arithmetic support and parallel moves improve performance, driving tighter and faster control loops.
- Low-power operation enables higher system efficiency due to lower power losses
- DSP and MCU functionality in unified, C-efficient architecture
- High-resolution PWM with 312ps resolution enables higher switching frequencies
- Up to 8kB data/program RAM
- On-chip flash memory and RAM can be mapped into both program and data memory spaces
- Two high-speed, 8-channel, 12-bit ADCs with dynamic x1, x2 and x4 programmable amplifier
- Four analogue comparators with integrated 6-bit DAC references
- Up to two 12-bit digital-to-analogue converters (DAC)
- One 16-bit quad timer (1 x 4 16-bit timer)
- Two periodic interval timers (PITs)
- Cyclic redundancy check (CRC) generator
- Windowed computer operating properly (COP) watchdog
- External watchdog monitor (EWM)
- DMA controller
- Integrated power-ON reset (POR) and low-voltage interrupt (LVI) and brown-out reset module
- Inter-module crossbar connection
- JTAG/enhanced on-chip emulation (EOnCE) for unobtrusive, real-time debugging
- Direct memory access (DMA) controller reduces core interruption, increasing performance
- 5V Tolerant I/O provides design flexibility
Applications
Signal Processing, Motor Drive & Control
Warnings
Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.
Product Information
Want to see similar products? Simply select your required attributes below and hit the button ×
- :
- MC56F82xx
- :
- 100MHz
- :
- 64KB
- :
- 54I/O's
- :
- CAN, I2C, SPI , SCI
- :
- 1V
- :
- LQFP
- :
- 64Pins
- :
- 3V
- :
- 3.6V
- :
- -40°C
- :
- 105°C
- :
- -
- :
- MSL 3 - 168 hours
Technical Documents (2)
CAD Downloads
--Please select...
✔
--Please select...
×
Terms and Conditions
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
Available for back order
More stock available to supplier lead times which is approximately 1/15/24
×
51
You can reserve stock now just order your desired quantity and checkout as normal. The quantity that cant be dispatched now will be placed on back order and sent as soon as we get a delivery from our supplier. You only get charged when the products are dispatched to you.
Due to market conditions delivery times are for general guidance only and may be subject to change at short notice
Php688.50
Pricing is unavailable. Please contact customer services.
- Price for:
- Each
Multiple: 1 Minimum: 1
| Quantity | Price | Your Price |
|---|---|---|
| 1+ | Php688.50 | |
| 10+ | Php541.10 | |
| 160+ | Php448.10 | |
| 960+ | Php391.30 | |
Pricing is unavailable. Please contact customer services.
Total Price:
Total Price: ( )
Total Price: --
Filter Tool