You have entered a value in the highlighted fields below that contain invalid characters. Please revise your selection using valid characters only.

Product may not be an exact match for your search

You previously purchased this product. View in Order History



Program and Debug Kit, PSoC® MiniProg3, Supports SWD / JTAG/ ISSP/ USB-I2C, 10-Pin SWD/JTAG Header


Image is for illustrative purposes only. Please refer to product description.

Manufacturer Part No:
Order Code:
Technical Datasheet:
CY8CKIT-002   Datasheet
See all Technical Docs

Product Information

Want to see similar products? Simply select your required attributes below and hit the button ×







MiniProg3, Program/Debug Ribbon Cable, USB Cable


Find similar products Choose and modify the attributes above to find similar products.

Technical Docs (3)

CAD Downloads


Terms and Conditions

CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.

Accept Cancel

Product Overview

CY8CKIT-002 is a PSoC MiniProg3 program and debug kit an all in one programmer for PSoC 1, PSoC 3 and PSoC 5 architectures and a USB-I2C Bridge for debugging I2C serial connections and communicating to PSoC devices. It is a protocol translation device. PSoC 1 has 8bit M8C CPU core and flash program memory up to 32KB. PSoC 3 has Single cycle 8bit 8051 CPU core and flash program memory up to 64KB. PSoC5 has 32bit ARM Cortex M3 CPU core and flash program memory up to 256KB. The MiniProg3 programmer or debugger provides the flexibility to work with different programming and debugging interfaces such as JTAG, SWD, ISSP and I2C. Which enables communication with target devices using I/O voltage levels from 1.5V to 5.5V. The bridging capabilities are used by PSoC Designer, PSoC Creator, PSoC Programmer. Secondary software such as Bridge Control Panel and Clock Programmer use the programmer COM hardware layer to support MiniProg3 functionality.
  • It has 5 pin ISSP/I2C/SWD connector
  • It has 10 pin JTAG/SWD connector
  • Busy LED
  • Status LED
  • SWD debugging protocol used for PSoC 3, PSoC 5
  • JTAG debugging protocol used for PSoC 3
  • I2C debugging protocol used for limited PSoC 1 devices


Embedded Design & Development


MiniProg3 programmer/debugger, 10 pin ribbon cable, USB cable, Software CD, Quick start guide.


ESD can damage boards and associated components. Recommends that you work on the board at an ESD workstation or use appropriate ESD protection such as an antistatic wrist strap attached to a ground.
Best Seller

586 In stock Need more?

4 SG stock available for 1-2 business days delivery
582 UK stock available for 3-4 business days delivery

Due to market conditions delivery times are for general guidance only and may be subject to change at short notice


Pricing is unavailable. Please contact customer services.

Price for:
Multiple: 1 Minimum: 1
Quantity Price Your Price
1+ Php6,752.30
Promotional price
Contract Price
Web only price
Web only contract price

Pricing is unavailable. Please contact customer services.

No longer stocked:: No Longer Manufactured::
Add to Basket Add to Basket Pre-Order
Restricted Item
Enter Your Part No/Line Note
Total Price:
Total Price: ( )
Total Price: --