Low

LINEAR TECHNOLOGY  LT8612EUDE#PBF  DC-DC Switching Buck Step Down Regulator, Adjustable, 3.4V-42V in, 6A out, 2.15MHz, QFN-28

LINEAR TECHNOLOGY LT8612EUDE#PBF
LINEAR TECHNOLOGY LT8612EUDE#PBF
Technical Data Sheet (395.04KB) EN See all Technical Docs

Image is for illustrative purposes only. Please refer to product description.

LINEAR TECHNOLOGY LT8612EUDE#PBF
LINEAR TECHNOLOGY LT8612EUDE#PBF

Product Overview

The LT8612EUDE#PBF is a 42V 6A high speed synchronous monolithic Step-down Regulator that consumes only 3µA of quiescent current. Top and bottom power switches are included with all necessary circuitry to minimize the need for external components. Low ripple Burst Mode® operation enables high efficiency down to very low output currents while keeping the output ripple below 10mVP-P. A SYNC pin allows synchronization to an external clock. Internal compensation with peak current mode topology allows the use of small inductors and results in fast transient response and good loop stability. The EN/UV pin has an accurate 1V threshold and can be used to program VIN under-voltage lockout or to shut down the LT8610 reducing the input supply current to 1µA. A capacitor on the TR/SS pin programs the output voltage ramp rate during start-up. The PG flag signals when VOUT is within ±9% of the programmed output voltage as well as fault conditions.
  • Ultralow quiescent current Burst Mode® operation (3µA IQ regulating 12VIN to 3.3VOUT)
  • <10mVP-P Output ripple
  • High efficiency synchronous operation
  • 95% Efficiency at 3A, 5VOUT from 12VIN
  • 94% Efficiency at 3A, 3.3VOUT from 12VIN
  • Fast minimum switch-on time (40ns)
  • Low dropout under all conditions (250mV at 3A)
  • Allows use of small inductors
  • Safely tolerates inductor saturation in overload conditions
  • 200kHz to 2.2MHz Adjustable and synchronizable
  • Current mode operation
  • Accurate 1V enable pin threshold
  • Internal compensation
  • Output soft-start and tracking

Product Information

Input Voltage Min:
3.4V
Input Voltage Max:
42V
No. of Outputs:
1Outputs
DC / DC Converter IC Case:
QFN
No. of Pins:
28Pins
Output Current:
6A
Output Voltage Min:
1.8V
Output Voltage Max:
41V
Switching Frequency:
2.15MHz
Topology:
Synchronous Buck (Step Down)
Operating Temperature Max:
125°C
Packaging:
Cut Tape
Product Range:
LT8612
Automotive Qualification Standard:
-
MSL:
MSL 1 - Unlimited
SVHC:
No SVHC (17-Dec-2015)

Find similar products  grouped by common attribute

Applications

  • Automotive;
  • Industrial;
  • Power Management

Legislation and Environmental

Moisture Sensitivity Level:
MSL 1 - Unlimited
Country of Origin:
United States

Country in which last significant manufacturing process was carried out

RoHS Compliant:
Yes
Tariff No:
85423990
Weight (kg):
.000312

Associated Products